A guide to use foils for your session

  1. Tear off a piece of heavy-duty aluminum foil and fold it twice to create a single layer.
  2. Wrap the foil around the top of the hookah bowl, ensuring all edges are tucked in without wrinkles or gaps.
  3. Press down firmly on the foil to secure it in place and use a foil poker to poke small holes in a cylindrical fashion for airflow.
  4. Attach the bowl to the stem of the hookah securely.
  5. Place two to three coals on an electric burner, light them up evenly, and adjust their height for optimal heat distribution.
  6. Allow the hookah to heat up and smoke before inhaling our shishas.
This picture is explaining a guide about shiha foil which is best HMD or aluminum foil
Play Video about This picture is explaining a guide about shiha foil which is best HMD or aluminum foil

which type of foil is the best?

closeup of heated shisha charcoals
  1. Regular Aluminum Foil: This is the most common and cost-effective type of hookah foil that does the job well. Ensure you use heavy-duty aluminum foil to prevent tearing while poking holes.
  2. Pre-Punched Hookah Foil: Designed for convenience, pre-punched foil comes with evenly spaced holes, saving time and ensuring consistent heat distribution.
  3. Heavy-Duty Hookah Foil: Thicker and more durable than regular foil, it is an excellent choice for longer, extended hookah sessions.
  4. Perforated Hookah Foil: This type features precise perforations that allow for better airflow control, enhancing heat and flavor tuning during your session

how much does it cost ?

Generally it is very cheap ranging from $10 and above, but nothing over $20. Good quality one can last you for for hookah for 50 sessions. Of course if you are looking for hookah accessories to buy around melbourne, you have come to the right place.

what are the pros of using foils ?

1. easy to clean

Once you are done with the foils, you can just crumple it and dispose it immediately. In comparison to HMDs, you’d have to wait for it to cool down before further cleaning off residue via the bottom.

what are the cons of using foils ?

1. time consuming

The process of wrapping a bowls and meticulously punching holes is somewhat time consuming as compared to HMDs.

2. constant flipping of coals

During your sessions, you need to constantly flip the coals to the hotter side. This is because the exposed sides gets cooler over time so you need to switch it up constantly to get a consistent burn.

3. gets cooler much quicker

Sometimes, a light breeze outside or air-conditioned rooms in lounges can cause the coals to cool off quicker. This is becasue the foils cannot contain the heat efficiently.

4. harder to setup

When the bowls get hot, yo’d have to wait for it to cool off before you can start changing the foils again. This is because of direct contact to the heated source by the foils iteself.

how to store it properly to prevent from tearing ?

  1. Keep Away from Sunlight: Store the foil in a dry, cool place away from direct sunlight to maintain its quality and prevent premature tearing.
  2. Use Resealable Containers: Transfer the foil to airtight containers like glass jars or plastic storage jars to protect it from damage and ensure longevity.
  3. Consider Refrigeration: Storing the foil in the fridge can help extend its lifespan, but ensure it’s in airtight containers to prevent moisture damage.
  4. Avoid Freezing: Do not freeze the foil as it can dry it out faster, affecting its quality and leading to tearing.

what other alternatives are there?

HMDs Metal Screen

  • Normally placed on top of the bowl in place of aluminium foil.
  • The vents can be opened or closed for better heat control.
  • No ash will be deposited in your tobacco.
  • Replacement and reusability are easier.
  • Retains more heat due to larger holes.
  • Maintains a constant temperature throughout your session.

can i just use a kitchen foil instead ?

No you cannot. This is because Kitchen foils are not designed for burning coals at high temperatures. Using them will result in more interchanging and fiddling with the coals instead of enjoying your sessions. 

We recommend thicker foils measured at about 40 microns. Generally, one layer is more than enough.

Leave a Comment